Custom 2-LED & 3-LED 3-Digit PCB Design
$10-60 USD
Posted 1 minute ago
•
Ends in 6 days
$10-60 USD
Paid on delivery
I need two small companion PCBs designed from scratch in Altium Designer: one board for driving 2 LEDs and another for driving 3 LEDs. I will provide the exact LED part number along with its current rating and power specifications. Each PCB should contain only the LEDs, current-setting resistors, and a pin-header interface, with no additional active components. The pin headers will connect directly to a larger motherboard, so the PCB outline should be compact and the header orientation should be practical for vertical mating. All LEDs must be mounted on the same side of the PCB and arranged symmetrically with proper spacing to ensure uniform illumination. I will also share the Gerber files of my existing 1-LED PCB. Please use these as a reference to understand the existing LED positioning, side placement, orientation, and overall design concept when creating the new 2-LED and 3-LED versions. ### Design Process Before starting PCB routing, please propose the PCB outline, LED placement and spacing, and pin-header location/orientation for both versions. I will review and approve the placement first. After approval, proceed with schematic design, PCB routing, trace widths, copper pours, clearances, and manufacturing preparation. ### Mandatory Software Altium Designer must be used for both schematic and PCB design. ### Deliverables - Altium schematic files (.SchDoc) for both versions - Altium PCB layout files (.PcbDoc) for both versions - Manufacturing-ready Gerber files - Drill files - Complete BOM with manufacturer part numbers and component values - 3D PCB views in Altium - STEP files for both PCB versions Both the 2-LED and 3-LED PCB designs must be included in the final handover package. Timeline The complete project must be delivered within **3 days**. Please confirm that you can complete both PCB versions within this timeline and provide all the requested design and manufacturing files.
Project ID: 40824211
About the project
3 proposals
Open for bidding
Remote project
Active 12 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
3 freelancers are bidding on average $47 USD for this job


PCB layout and circuit design are directly aligned with this project, and I can create both compact LED companion boards in Altium Designer with clean, practical layouts suited for vertical motherboard mating. My skills include Circuit Design, Electronics, Embedded Systems, and PCB Layout, supported by broader experience in CAD and 3D modeling. I can design the 2-LED and 3-LED schematics and PCB layouts using your existing 1-LED Gerbers as the reference for LED side placement, orientation, spacing, and overall concept. I will also prepare the requested manufacturing outputs, including Gerbers, drill files, BOM, Altium 3D views, and STEP files, while keeping the designs limited to the LEDs, current-setting resistors, and pin-header interface. I can complete both PCB versions within the requested 3-day timeline and would be pleased to deliver a complete, organized Altium handover package.


These are simple boards, so the main thing is getting the outline, LED spacing and header orientation right for vertical mating. I'll start from your 1-LED Gerbers, send you the placement for both versions to approve, then finish both boards in Altium. You'll get schematics, PCB files, Gerbers, drill files, BOM and STEP files. Yes, I can deliver both within 3 days, as long as the LED datasheet and Gerbers reach me early. Some of my PCB boards are in my portfolio.
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗