Full Construction Drawings: Expanded Tiny House
$30-250 USD
Posted 1 minute ago
•
Ends in 6 days
$30-250 USD
Paid on delivery
I’m taking my one-bedroom tiny-house concept and doubling its width so the finished footprint lands around 36' × 36'. This house will replace one of the tiny houses in the village and be occupied by the Village Chief. We will need a mirror of this house so we can build it either way, with the porch on the right or left. The layout stays familiar—front porch still spans half the façade and the core kitchen–dining–living space remains open—but the program grows to include: • a master suite with its own bath • two additional bedrooms served by a shared hall bath • an electrical panel relocated from the old closet location into the main hallway • rough clapboard siding on all elevations • one bedroom or the living room that projects forward, opposite the existing porch projection Because this version will be the first one actually built, I need a complete, permit-ready drawing set that satisfies the applicable state or national residential code. That means stamped-caliber documents covering floor plans, elevations, building sections, structural framing, electrical (reflecting the panel move), plumbing, and HVAC layouts—everything a building department expects when issuing a permit. Please prepare the package in a standard CAD format (AutoCAD, Revit, or similar) plus PDFs for easy submission. Accuracy to the specified dimensions and code compliance are essential; I’ll review and sign off once the drawings can be handed straight to the contractor and the permitting office.
Project ID: 40823291
About the project
11 proposals
Open for bidding
Remote project
Active 10 secs ago
Place your bid
Bid amount Email addressBenefits of bidding on Freelancer
Set your budget and timeframe
It's free to sign up and bid on jobs
11 freelancers are bidding on average $126 USD for this job


Hello, Your expanded tiny-house concept needs accurate architectural documentation, and my expertise in AutoCAD, building architecture, building design, and structural engineering directly matches that requirement. I can develop the 36' × 36' layout with the enlarged open kitchen-dining-living area, master suite, additional bedrooms, shared bath, porch options, forward projection, and rough clapboard elevations. My AutoCAD capability supports a clean, editable drawing package, while my building and structural design skills are suited to coordinating floor plans, elevations, sections, framing information, and the relocated electrical panel. I can also document the mirrored configuration so the porch can be built on either side, and prepare clear PDF sheets for contractor and permitting review. My architectural visualization background further helps ensure the design is communicated clearly and consistently across the set. I would be pleased to develop this important village residence into a precise, professional drawing package ready for your review and coordination with the appropriate permitting professionals. Thanks!


Hi there! I have read your project brief for the expanded tiny house construction drawings. Trygve Studio's expertise is architecture, interiors and product development, with a team of architects, engineers and 3D visualizers. We would approach this by reviewing your concept to develop a complete set of architectural and MEP drawings, noting that structural engineering and calculations are excluded from our services. Please have a look at our profile: https://www.freelancer.com/u/faisal8071 Regards, Trygve Studio


Hey there, I can develop your 36' × 36' Village Chief residence into a detailed, permit-ready drawing package, including mirrored porch configurations, floor plans, elevations, sections, structural framing, and coordinated electrical, plumbing, and HVAC layouts. I’ll ensure accurate dimensions, the relocated electrical panel, additional bedrooms and bathrooms, and clapboard siding are reflected throughout. You’ll receive editable CAD files and submission-ready PDFs, with final code review and stamping by a licensed professional in your jurisdiction. Which state or country will the house be built in, and can you share the original tiny-house plans? Let’s connect over a chat so we can discuss this in more detail. Best Regards, Ayesha D


You need your one-bedroom tiny house widened to about 36 by 36 feet, with a master suite, two bedrooms sharing a hall bath, the electrical panel moved into the hallway, clapboard siding on all elevations, and a mirrored porch version for left or right builds. We would model it in Revit and deliver the set as RVT and DWG files with PDF prints. The package covers floor plans for both porch orientations, all four elevations with clapboard siding noted, building sections, a structural framing plan with joist and beam layout, an electrical layout showing the relocated panel, plumbing and HVAC layouts, and a door, window and finish schedule. We prepare the set to the residential code you name, but we are not a licensed firm and do not stamp drawings, so your licensed architect or engineer would need to seal it before it goes to the permit office. We can work to the one-day delivery you have set, and revisions are included. Two questions: which state or national residential code edition and local amendments apply, and do you have wall heights, roof pitch and the original tiny house drawings or dimensions to start from? Shazia, Shazia Works


✅ Hi, there! ✅ You’re expanding the tiny-house design to ~36' × 36' and need a complete, permit-ready, mirrorable drawing set that the village chief build can go straight to contractor and permitting. I can produce the stamped-caliber CAD package (plus PDFs) covering floor plans, elevations, sections, structural framing, and the electrical/plumbing/HVAC systems, updated for the master suite, shared hall bath, relocated main electrical panel, rough clapboard elevations, and the forward projection room/living room. ✔ My deliverables for you will be: - Permit-ready architectural plans (mirrored option included) - Structural framing drawings + building sections - Electrical, plumbing, and HVAC layout drawings (reflecting panel move) - CAD package in a standard format + submission PDFs Best regards, Michael


Hi Dear, I summarize all the details and provide you with clear work . I am a professional architect designer & 3d visualizer with 8 years of experience. you looking for Full Construction Drawings: Expanded Tiny House I have worked on several similar projects and can deliver quality of work to tight deadlines. You can see an example of one of those projects in my portfolio here: https://www.freelancer.com/u/Syedjunni I can generally compile up to 2 projects per day. with team work I'm interested to hear more about the project If you award me the project I'd be very happy to discuss this further and get started for you as soon as possible. Thanks! Syed


My 15+ years in engineering design and construction documentation directly match your need for a complete, buildable drawing package for this expanded tiny house. I specialize in architectural plans, civil and structural drafting, MEP coordination, permit drawing preparation, and residential construction drawings, with experience using AutoCAD, Revit, SketchUp, Bluebeam, and related technical software. I can develop the 36' × 36' layout with the open kitchen–dining–living area, master suite, additional bedrooms, shared bath, relocated electrical panel, porch arrangement, projecting room, and rough clapboard elevations. My structural, electrical, and building-design skills support coordinated floor plans, elevations, sections, framing, electrical, plumbing, and HVAC documentation, including mirrored versions for either porch orientation. I will provide the CAD model and organized PDFs suitable for review and permitting, while recognizing that final professional sealing must be completed by the appropriately licensed authority where required. I would be glad to apply my technical drafting and building-systems coordination experience to this important village residence and deliver a precise, contractor-ready package.


Hi there, The expanded 36' × 36' tiny-house design needs a coordinated, permit-ready drawing set that supports porch mirroring, the relocated electrical panel, the forward projection, and complete architectural, structural, electrical, plumbing, and HVAC documentation. I have strong hands-on experience with Engineering and Electrical Engineering and have solved similar problems involving residential drawing coordination and electrical-layout integration. My approach would be to: * Review the existing concept PDF, dimensions, layout, and applicable residential-code requirements. * Identify the root coordination issues and determine what can be reused versus what needs to be changed. * Implement a clean, maintainable solution using standard CAD/BIM documentation workflows for plans, elevations, sections, framing, electrical, plumbing, and HVAC layouts. * Test edge cases, dimensional accuracy, mirrored porch configurations, service clearances, load paths, and integration behavior. * Deploy or integrate the fix without disrupting the existing design intent, delivering editable CAD files and submission-ready PDFs. The relocated panel should be coordinated early with wall framing, service pathways, working clearances, and the electrical schedule so later MEP revisions do not compromise code compliance. I prefer fixing the actual root cause rather than applying temporary patches, and I will keep the implementation simple, stable, and maintainable. I can start by reviewing the
内容来自 Freelancer News,版权归原作者所有。
阅读原文 ↗