Embedded Firmware for Custom PCBA

$250-750 USD

Posted 1 minute ago

•

Ends in 6 days

$250-750 USD

Paid on delivery

I have a fully-assembled prototype board on my desk and now need the firmware that will bring it to life. You and I will work together to map out the exact feature set, then you’ll build, debug, and validate a production-ready image. What I can put in your hands: the powered-up prototype itself. You’ll be able to probe every signal, run JTAG/SWD sessions, and confirm that the board behaves exactly as specified once your code is flashed. What I expect back: • A single, ready-to-install firmware file (HEX/BIN or equivalent) • Proof it runs reliably on the physical board—either through a video walkthrough, live session, or on-site test if you’re local I’m presently only asking for the compiled image and demonstrated in-hardware validation; if you prefer to include full source as an add-on, we can discuss that separately. Experience with common embedded toolchains (GCC, Keil, IAR, STM32CubeIDE, PlatformIO, etc.), peripheral driver development, and real-time debugging will be key to moving quickly. If you’re comfortable picking up hardware you didn’t design, interrogating it, and delivering bullet-proof firmware, let’s talk.

Project ID: 40822233

About the project

18 proposals

Open for bidding

Remote project

Active 9 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

18 freelancers are bidding on average $495 USD for this job

User Avatar
Flag of PAKISTAN

Hi, I understand you need firmware that brings your assembled PCBA to life and is proven on the real hardware. I can first review the board details and required behavior, map the Microcontroller peripherals, then build the Embedded Software in C Programming with careful Electronics checks. I will debug through the available JTAG/SWD setup, test the main functions on the prototype, and provide a ready-to-install HEX/BIN image with clear validation proof. The exact scope can be confirmed before development, especially if source code is needed later. Which microcontroller and boot method are on the PCBA, and what hardware behavior must be demonstrated for acceptance? Which microcontroller is fitted, and can you share its datasheet, schematic, pin map, and required peripheral behavior? Please start the chat and let’s discuss the board and feature list.

User Avatar
Flag of UKRAINE

My embedded systems, firmware development, C programming, microcontroller, electronics, and debugging skills align directly with bringing your assembled PCBA to life. I can work with unfamiliar hardware, investigate its signals and peripherals, and develop the firmware needed to produce a ready-to-install HEX, BIN, or equivalent image. My experience spans software development and industrial IoT solutions, supported by practical electronics and embedded-systems capability. This combination is valuable for moving beyond compilation: I can focus on peripheral behavior, real-time debugging, board-level issues, and validating that the firmware operates correctly on the physical prototype. I can deliver the compiled firmware image and support reliable in-hardware validation through a video walkthrough or live demonstration, with full source available as a separate option if needed. Choose me to turn your prototype board into a working, validated embedded product.

User Avatar
Flag of UKRAINE

Hi there, Which MCU or SoC is on the board, and do you already have a schematic or pin map for the prototype? Are there any exact behaviors to verify first, such as boot flow, communications, sensors, or timing constraints? The main challenge is to identify the board correctly, then bring up the core peripherals in a clean order. A practical path is to start with low-level pin probing, confirm clock and reset behavior, then build and flash a minimal firmware image before adding each required driver. A real risk here is hidden hardware variation, especially on a custom PCBA with only the assembled prototype to inspect. That is usually handled by tracing signals step by step, validating each peripheral on the bench, and keeping the first image small enough to isolate faults fast. The work can be tested directly on the board with JTAG or SWD, then confirmed through repeat flashing and runtime checks until the behavior is stable. What exact MCU or SoC is on the board, and do you have the schematic or pinout? A final handoff can be a ready-to-install HEX or BIN, with validation notes from the live hardware session. Best, Hlib

User Avatar
Flag of VIETNAM

==== Hi - Quy Dao here ==== "A SINGLE, READY-TO-INSTALL FIRMWARE FILE" - I will first map the board’s hardware and agreed feature set, then implement and debug the firmware against the prototype. I’ll inspect the MCU and peripherals, use JTAG/SWD to investigate signals and verify behavior, and build the image with the appropriate toolchain. I’ll test the agreed functions on the physical board, check for reliable operation, and deliver the compiled HEX/BIN file with a video walkthrough or live validation session. I can estimate the schedule once I’ve reviewed the board documentation and feature scope. Looking forward to work with you.

User Avatar
Flag of NIGERIA

Hello there, I can help bring your prototype board to life. I understand you need firmware that works reliably on the physical hardware, and I have experience with debugging and validating embedded systems. My first step would be to review your board schematics to get a clear understanding of the hardware architecture before I start coding. I work out of Lagos, Nigeria, and I'm comfortable working with C programming for embedded devices. Let me know if you'd like to chat more about the details.

User Avatar
Flag of FINLAND

I can help turn your assembled prototype PCBA into a working embedded system through a structured firmware development, debugging and hardware validation process. I'll start by understanding the board architecture, identifying the microcontroller, mapping peripherals and reviewing the required functionality before implementing the firmware. Here's my proposed approach: Analyze the MCU, board interfaces and available hardware documentation. Establish the firmware architecture and feature requirements. Develop peripheral drivers and application logic in C. Configure communication interfaces, interrupts and timers as required. Debug using JTAG/SWD and appropriate embedded toolchains. Test functionality directly on the physical prototype. Optimize reliability and resolve hardware-related issues. Deliver a compiled HEX/BIN firmware image ready for installation. I'll validate the final build on the actual board and provide a video demonstration or live walkthrough showing its operation. I suggest milestone-based development, starting with hardware assessment and feature confirmation before firmware implementation. Source code and technical documentation can also be discussed as an additional deliverable.

User Avatar
Flag of UKRAINE

Hi there, I can help turn your custom PCBA prototype into reliable, production-ready embedded behavior. With 10+ years in Embedded & Power engineering, firmware development, peripheral driver work, and real-time debugging, I’ll work from your exact feature set to build the correct firmware image, then validate it on the physical board using the signals and debug access you’ll provide (e.g., JTAG/SWD). What you’ll receive is a single ready-to-install HEX/BIN (or equivalent) plus clear in-hardware proof of dependable operation through a walkthrough or live validation. If you later want full source, we can scope it as an add-on. Let me know if my profile looks interesting, and we can set up a time to talk. Best regards, Vadym P.-

User Avatar
Flag of AUSTRALIA

Hello, I’d be glad to help bring your prototype board to life with reliable, production-ready firmware. I work regularly with embedded systems in C Programming, including board bring-up, peripheral driver development, and real-time debugging on hardware I didn’t design myself. Recently, I completed a similar job where I inherited a custom PCB with an unfinished firmware base. I mapped the peripherals, validated the signals with JTAG/SWD, fixed startup and timing issues, and delivered a stable HEX image that ran cleanly on the physical board. That kind of hands-on debugging and validation is exactly the part I enjoy most. For your project, I’d first confirm the feature set and hardware behavior, then build and test the firmware directly on the prototype. I can also provide video proof of the board running, or do a live validation session if needed. If source code is useful later, that can be discussed separately. A couple of quick questions: 1) What MCU is on the board? 2) Do you already have any schematics, pin map, or bootloader details available? If you’re open to it, I’d be happy to discuss the board in a quick call. Best regards, Istkhar

User Avatar
Flag of TURKEY

Hi, bringing up firmware on a board someone else designed is a big part of what we do, and our lab has an oscilloscope, logic analyzer, SWD/JTAG probes (ST-Link, J-Link) and bench supplies, so the board can be probed and validated properly. How I would work: 1. Start from your schematic/BOM: power-up check, clock tree, programming/debug interface confirmed over SWD/JTAG before writing features. 2. Agree the feature list with you as a short spec (peripherals, timing, power modes, fault handling), then implement driver by driver with a test for each. 3. Validation on the real board: scope/logic captures of the key signals, a test log against the spec, and a recorded video walkthrough of the board running. 4. Deliver the release HEX/BIN plus flashing instructions; source and build files as the optional add-on you mentioned. The board would need to be shipped to our lab in Izmir, Türkiye (or I can work remotely with you via a live session if you prefer to keep it). Quick question: which MCU is on the board, and do you already have the schematic and a list of the peripherals that firmware must drive?

User Avatar
Flag of VIETNAM

⭐⭐⭐⭐⭐ Hi there, Could you confirm the board’s target MCU/SoC and the core features you need the firmware to deliver? From your prototype PCBA, the main focus is mapping the exact feature set to drivers and then delivering a production-ready HEX/BIN that’s proven in-hardware. I’ve built and validated embedded firmware for AI/robotics prototypes, including peripheral driver bring-up and SWD/JTAG-based debugging until the behavior matched the spec. ❓ What exact MCU/board part number are you using (and any existing schematics/docs)? ❓ Which interfaces/peripherals must be exercised for the validation video (e.g., UART/SPI/I2C/Ethernet/GPIO/JTAG)? We’ll focus on embedded C/C++ firmware, real-time debugging, and a reliable flashing-ready build; I can start immediately once you share the MCU info and expected behavior. Best regards, Phuong Nam D

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅