Battery-Powered Motor Control PCB

$250-750 USD

Posted 1 minute ago

•

Ends in 6 days

$250-750 USD

Paid on delivery

I have a concept for a compact, battery-powered controller that must reliably drive a small DC motor or similar moving part. Size and energy efficiency are critical, so the board should be optimized for low-power operation while still providing enough current to start and reverse the motor under load. Scope • Schematic capture, component selection, and PCB layout for a single-cell Li-ion (or comparable) supply. • Integration of an appropriate microcontroller, a motor-driver IC or discrete H-bridge, battery-charging circuitry, protection, and basic test points. • Consideration for low quiescent current, EMI reduction, and straightforward firmware flashing headers. Deliverables • Editable schematic files and PCB layout (Altium, KiCad, or similar) • Complete BOM with manufacturer part numbers and footprints verified for availability • Gerber/ODB++ files ready for fabrication • Assembly drawing and simple bring-up guide Acceptance The design must start and stop the motor cleanly from a fresh or partially discharged battery, remain within safe temperature limits during continuous operation, and draw less than 50 µA in sleep mode. If you can also provide a quick-turn prototype or support DFM tweaks after the first fab run, let me know—this would be a plus but not mandatory.

Project ID: 40822176

About the project

4 proposals

Open for bidding

Remote project

Active 15 secs ago

Place your bid

Bid amount Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

It's free to sign up and bid on jobs

4 freelancers are bidding on average $390 USD for this job

User Avatar
Flag of UKRAINE

Hello, Designing low-power embedded hardware and motor-control PCBs is my core focus, making this compact single-cell Li-ion controller a strong match for my experience. I specialize in schematic capture, component selection, PCB layout, motor control, and embedded systems using Altium Designer, KiCad, Eagle, or EasyEDA. I can develop the complete hardware package around a suitable microcontroller, motor-driver IC or H-bridge, charging and protection circuitry, flashing header, and accessible test points. My embedded experience includes STM32, ESP32, Nordic nRF52/nRF53, MSP430, PIC32, and other platforms, while my PCB work covers low-power and IoT boards, BOM validation, custom footprints, Gerber generation, and manufacturing documentation. I will keep battery life, motor startup/reversal current, thermal behavior, EMI, and the sub-50 µA sleep requirement central to the design. I can provide editable design files, verified BOM and footprints, fabrication outputs, assembly documentation, and a practical bring-up guide. Choose me to turn this motor-control concept into a compact, prototype-ready PCB. Thanks!

User Avatar
Flag of INDIA

My PCB design and embedded systems skills align directly with your compact battery-powered motor controller, including schematic capture, component selection, and PCB layout for a space-constrained electronic product. I can work across Circuit Design, Electronics, Embedded Systems, and PCB Layout to integrate the microcontroller, motor-driver or H-bridge, single-cell battery interface, charging and protection circuitry, flashing header, and practical test points. I will also focus on the electrical priorities you specified: low quiescent current, clean motor control, compact routing, EMI-conscious layout, and a sleep target below 50 µA. Deliverables can include editable design files, BOM and footprints, fabrication outputs, assembly documentation, and a bring-up guide. My broader CAD and technical design background supports accurate, well-organized product documentation and manufacturable layouts. I would be glad to design this controller and provide a reliable PCB package ready for fabrication.

User Avatar
Flag of TURKEY

Hi there, I noticed you’re looking for a battery-powered controller optimized for low-power operation to drive a small DC motor. I can assist with the schematic capture and PCB layout, ensuring that the design minimizes quiescent current and incorporates a suitable motor driver IC or H-bridge. I’ll provide editable files in Altium or KiCad, a complete BOM with verified parts, and Gerber files ready for fabrication. Additionally, I can include a simple bring-up guide to facilitate initial testing of your design. Let me know if you’d like to discuss this further or have any specific requirements regarding the microcontroller selection or testing protocols. Regards, Ali

User Avatar
Flag of UNITED KINGDOM

The 50 µA sleep target is the real constraint here. It decides the part choices: a low-Iq charger and regulator, a driver with a true shutdown mode, and a load switch so the H-bridge leaks nothing while asleep. I'll deliver the schematic, layout, BOM with part numbers, Gerbers, assembly drawing and a bring-up guide. Battery, charging and motor boards are a big part of my background, and some are in my portfolio. What are the motor's voltage and stall current?

内容来自 Freelancer News,版权归原作者所有。

阅读原文 ↗

把喜欢的内容,留在你的新标签页。

打开我的订阅